4 Beryllium Tweeter Prototypen spielen hier im LX521.4.
Der extrem steife Beryllium Dom hat nochmals einen kleineren Dom Durchmesser als der Standard Tweeter:
Das kommt dem Ideal der Punktschallquelle noch einen Schritt näher.
Das laterale Abstrahlverhalten verbessert sich bei gleichzeitiger Beibehaltung der Abstrahlkarakteristik im Bereich des
Beryllium ist extrem steif, leicht, selten und teuer.
Aber sie belohnen mit einer Präzisierung der Höhen, auch Mitten und Bässe profitieren (Transienten durch erweitertes Obertonspektrum).
Beryllium Tweeter werden auf Sonderwunsch bei fertig gebauten LX521.4 Systemen eingesetzt.
Auf Anfrage auch im 4er Set für Upgrades erhältlich (keine Änderung an Baffle oder Weiche nötig)
449€ p.pc. (EU Endverbraucher zzgl 19%MwSt : €534,31)
4 Beryllium Tweeter upgrade nur 1490€ (EU Endverbraucher zzgl 19%MwSt : €1773,10)
19.Jazztival im SCHLOSS ELMAU.
LXmini vor einer beeindruckenden Alpenkulisse.
Ihr natürlicher 3D Klang überzeugt Jazzliebhaber.
Auch in diesem Jahr fand das legendäre Burning Amp Festival in Ft Mason /SanFrancisco statt.
Eike und Siegfried Linkwitz waren Gastgeber im stets gut besuchten "Linkwitz Lair".
Highlight sollte die Zusammenarbeit der Masterminds Siegfried Linkwitz und Nelson Pass werden.
Nelson Pass´ neues 3-wege ASP mit verzerrungsarmen JFET Buffers versorgt ein LXmini+2 system.
Des weiteren war ein Prototyp der neuen PowerBox 6pro "analog precision" am Start, mit identischer ASP-Abstimmung wie das Nelson Pass JFET ASP.
Die PowerBox 6pro "Analog Precision" integriert 6 Hypex NCore Verstärker.
Die Digital/Analog-Wandlung muss also vor einer analogen PowerBox stattfinden. Wir haben uns hier für ein ausgezeichnetes DAC Produkt aus dem Profi-Studiobereich entschieden: arfi DAC2
Beim Burning Amp Festival standen zwei komplette LXmini +2 Systeme bereit.
Aus techn Gründen, konnte lediglich das LXmini+2 via PowerBox spielen.
Und dies umso überzeugender! Erste Kommentare : This system shouldn´t sound so good!
Weitere Bilder: http://www.linkwitzlab.com/BA-2017/lxmini+2.htm
Danke Charlie Laub, Nelson Pass und all die Helfer, die zum Gelingen des BAF2017 beigetragen haben!
Wer die Möglichkeit findet , das diesjährige Burning Amp Festival zu besuchen,
darf auf Überasschungen (Two Masterminds Cooperate) und
interessante Vorträge gespannt sein.
12.NOV 2017 , Fort Mason, San Francisco
Das Jazzfest Esslingen lädt zum Empfang in der Kessler Villa.
Dort spielten wir Live Aufnahmen vom Esslinger Festival 2015 auf LXmini+2
Die Musikliebhaber konnten sich von der 3D Bühnendarstellung des
dieses Systems überzeugen.
LX521.4 bekommt eine neue Anschlussoption im Brückenfuss. Die SpeakOn8 Halterungen sind bereits vormontiert. Sie ersetzen die SpeakOn Verbindung (mit senkrecht nach oben verlaufenden Anschlusskabeln) zum Baffle Support. Dies erlaubt eine aufgeräumtere Ansicht der LX521 Rückseite.
Alle Plätze beim Open House waren gebucht. Neben Anreisen aus aus Irland (Cheers Dara!), kamen LX Lautsprecher-Interessenten aus Belgien, der Schweiz und Deutschland.
Es wurde vom Linn Akurate DS Streamer (modifiziert von Dr. Gert Volk) in PowerBoxes 6pro NCore via SPDIF übertragen.
"unglaubliche Abbildung mit den LXminis ...",
"..die LXsub2 des LXmini+2 verstärken diese Räumlichkeit noch weiter ..",
"LX521.4 sucht Seinesgleichen , unabhängig vom Preis"......
Probehören von LXmini, LX521.4 und PowerBox ist am Samstag 25.März möglich.
Nahe Stuttgart Flughafen.
Interessenten melden sich bei info@magicLX521.com zur Ort-/Zeitabsprache.
David B. (Sweden) , LXstudio:
Their names are Marley and Yuki and love the music in the house, even at reference volumes.
As requested by customers, we are happy to announce that the LX521 kit is now available in HDF as well. See LX521kit HDF.
HDF is a modern high density wooden material, that avoids the downsides of MDF (soaking edges, etc). HDF in dark anthracite:
It is an extremely robust high density, black coloured wood fibreboard (>1,000 kg/m³). Its high strength across the complete board cross section facilitates three-dimensional processing without any risk of fraying. It is a natural material made of wood which defibres gently and is manufactured according to ecological principles.
HDF can be used as extremely compact, robust support board. Thanks to its black colouring and the compact product structure, the board can also be used as an attractive surface without additional coating.
HDF is ideally suited for applications requiring ecologically sustainable material due to its environmentally compatible manufacturing.
Easy connection and setup tips for a PowerBox MASTER-FOLLOWER-tandem (LX521.4) may be found here.
Press <Pause> if desired to finish reading. Or as Download
Last weekend, we had an audition in Stuttgart/Gemany, where two groups of interested audiophiles from Austria/Germany/Switzerland listened to the extraordinary performance of LXmini and LX521.4, that you cannot buy in HiFi shops.....
A quick review of the setups:
> signal source : LINN Akurate DS (modded by Dr Gert Volk)
> BNC-to-digRCA cable
> LX521.4 on two PowerBoxes 6pro NCore (Master-Follower-Tandem) , interconnected by a Sommer CAT7 patch cable.
> LXmini, fed by a PowerBox4180 (UcD based)
The first PowerBox 6pro NCore pair reached his new owner.
This MASTER - FOLLOWER tandem took the joy of LX521.4 playback to another level.
Listening in a small group , including a well respected sound engineer (Grammy-nominated recordings in his portfolio) , we all observed a joyful richness in details, beeing combined with a pleasant coherence of soundstage and timing.
We were pleased by the ease and naturalness of the artists presentation , coming from this extraordinary LX521.4 system.
Thanks to all of you coming over to the Burning Amp 2016. Hopefully, you had a good time and could enjoy the LXmini +2 demo sessions. The LXminis were built by using precision CNC mitered, anthracite HDF parts. LX speakers are exceptional speakers, designed by Siegfried Linkwitz. Leaving traditional "box"-design behind.
We played music from the HD of a laptop, running JRiver. This laptop became a high-end music source when connecting its USB output to the AFI-USB noise blocker/reclocker.
The AFI-USB delivered a completely reclocked digital signal to the brand new PowerBox 6pro NCore. Professional 8pole SpeakON plugs at its output connected to the LXminis and SUB2 spealers (= LXmini+2)
Your feedback on the systems naturalness and soundstage was overwhelming ("like analogue, just better" , "realistic soundstage @ various listening positions" , " feels like listening to music and not to equipment" , ......) Thank you!. If we could not answer all your questions -or of more questions arose later- see the flyers below and feel free to e-mail to info@magicLX521.com
Further information from our flyers:
The just launched PB 6 pro NCore Flyer Down
the upcoming PowerHouse Flyer Download
and the AFI USB Flyer Download scroll down this site to 05JUL2016 for furter details
Let´s meet 13NOV2016 at the Burning Amp Festival in San Francisco / Ft Mason.
Be among the first to Listen to our new PowerBox 6 pro NCore.
PowerBox 6 pro NCore Hypex DSP with 6 NCore-amplified channels
is the high-end solution to feed your LXmini, LXmini +2, LXstudio and LX521.4 (for LX521.4 -> one PowerBox per side).
It is all you need between your music player and LXspeakers.
....and PowerBoxes work easily with other speakers (replacing passive crossovers, boosting them to NCore performance). Via USB cable, feel free to load your own filters into the PowerBox. Additionally, adjust every channel in gain, time delay and inverting
LXmini+2 is the latest system design by linkwitzlab. LXmini+2 may easily be supplied by PowerBox 4180.
+2 woofers (= LXsub2) get their signals from PowerBox "line-out" (=Ch5&6).
Fully balanced connection to our PowerAmp 2180.
PowerAmp 2180 is the dedicated amplifier for these LXsub2 woofers
PowerAmp 2180 is based on 2x Hypex UcD180OEM. 699€ (in EU plus 19%VAT)
NEW : Alternatively , you may consider the brand new 6 ch PowerBox 6pro NCore . €2490 (in EU plus 19% VAT)
Connect the PowerAmp 2180 to these LXsub2 woofers with our standard 1-click SpeakON Y-cables.
Y-cables available in 2x5m or 2x2,5m length.
PowerBox4180 PowerAmp 2180
LXmini+2 as upgrade kitfrom LXmini:
Special introduction price for LXsub2 kit incl 2x SEAS L26RO4Y woofer drivers: €499 //in EU add 19%VAT
additional tips for LXmini kit FR driver ring mounting:
The FR mount ring is designed for easy mount and tight fit into the upper tube.
But tight fit means also, that the mounting ring might need some pressure of 4 fingers and/or some other measures to make it in. For mounting,
-make the upper tube stand on a table
-attach the FR mount ring to the magnet (as on the photo) and secure it with a few drops of (hot) glue
-press the FR driver with the attached FR mount ring into the upper tube.
-you may rotate itunder pressure, left-right
-slight production tolerances (tube inner diameter and mount ring outer diameter) or material edges at the tube cut inner side may be overcome by
deburring (sanding) the inner rim of the tube and/or the edges of the mount rings blocks (see orange pointers)
warming the tubes first centimeters in hot water
slightly sanding the blocks outer side (blue pointer)
Finally, adjust the last millimeters by equally pressing on the 4 blocks, till the little “noses” touch the tube rim.
Additionally, secure the mounting rings position with a drop of plastic glue at each of the 4 blocks at the inner surface of the tube.
The FR driver sits perfectly.
Transforming an ordinary laptop, tablet or desktop computer into a high-end music source:
AFI-USB eliminates HF noise and provides a completely reclocked signal (not just PLL)
The typical application with the PowerBox consists of these elements
Computers USB port connecdts via USB cable to
-connects with 3 fibre optic cables to-
-connects (ideally) with shielded Ethercon network cable to-
Adaptor to BNC/digRCA/digXLR
Digital signal routing: Computers USB port > AFI-USB > PowerBox (or DAC)
The AFI USB concept (excerpt from ACOUSENCE information):
The USB audio-converter module transforms the afi,connected to a computer and a DA converter (DAC), into a full-fledged, very high-quality audio source device for digital playback. The computer becomes a music player. The issues of "avoiding HF interference and clocking precision" are perfected here.
In principle, a computer is ideal for managing a digital music collection and playing back music with regard to its flexibility and operating convenience. Unfortunately, from a sound point of view, a computer is a highly inhospitable environment for the audiophile's enjoyment of music. Computer are machines with calculate at high clocking rates and run innumerable processes during music playback. As a result, they create a broad spectrum of high-frequency interference.
In order to keep this unavoidable interference from the computer away from the sound-sensitive audio section, our USB option has a two-part design:
1. The external USB-FOC module for communication with the computer
2. The internal USB module built into afi, which takes over all tasks of the music playback procedure which are relevant to the sound.
Both units are connected to each other with the help of three fibre optic cables (FOC) for maximum isolation from interference. Thanks to the optical coupling, there is no direct electrical pathway for HF interference from the computer to the audio section. Both units are completely galvanically isolated, so mass flows are eliminated. Secondary effects of the computer on the audio equipment (interference via electric grid and electromagnetic radiation) can also be optimised by the increased distance between the computer and the audio devices. The standard length of the FOCs is two metres; six metre cables are also available.
The most important difference between this and a conventional transmission of a digital audio signal via optical cable from the computer to a DA converter is: if a conventional digital signal is transmitted via toslink, then the clocking signal is embedded within it. The clocking information is at the same time the HF interference of the computer in the form of Jitter, and Jitter is very difficult to completely remove after the fact. Therefore, the optical audio connection does not eliminate the interference from the computer per se.
In contrast, the FOC connection of our USB module contains no clocking information that is relevant to the sound. Therefore there are a total of three FOCs. The only clocking information relevant to the sound is created by two reference oscillators in the Afi module. The audio files are thus clocked under ideal conditions, far away from computer influences. The external USB module receives the clocking information from the internal module as well, but this is only on a "working basis" in order to be able to send the audio files to the internal module. However, neither the clocking quality of the FOC connection nor the clocking precision of the audio stream sent to the Afi affect the sound.
The double (duplex) FOC is responsible for both the clocking to the USB module and the audio from the USB module. The third FOC only transmits the switching signal for each sampling rate family. Depending on whether the rate is 44.1 kHz multiples or 48 kHz multiples, the appropriate oscillator is activated, which then very precisely clocks the audio stream to the DAC, fully independent of the computer.
The external USB-FOC module with a USB-B jack (1) to be connected to the computer, Duplex FOC connection (2) and FOC interconnection (3). The RJ45-Ethercon output of the afis or afi is either directly connected via RJ45-XLR cable (4) or via RJ45-RJ45 cable (5) plus adapter box (6) to the DAC.
AFI-USB system incl 3-way optical interconnect cables from USB to AFI Box €1049 (plus 19% VAT inside EU)
RJ45-RJ45 EtherCon cable, 1m , €16,81 ; (20€ incl VAT inside EU)
RJ45-BNC adaptor incl BNC-RCA adaptor €42,02 ; (€50 incl VAT inside EU)
Readily assembled turn-key LXminis in black will be stuffed with black damp wool. The new rear grill keeps the black damp wool in place.
Following customer requests for amplification modules, we are able to announce a compact solution with
UcD180OEM highest qualtity Hypex amplifiers DIY bundle.
You may easily combine this 4x180W assembly with the Hypex DLCPs.
A central board with 4 x 36pin plugs and one 20pin plug allow secure connection.
Package contains 4 180W UcD180 OEM modules , 1 central pcb, 4 36-pin connectors , 1 20pin connector
€449 export (€534,31 incl VAT)
LXmini+2 woofer additions will be available soon. You may -again- expect a kit of highest quality components, allowing a fast and precise assembly without visible screws etc. Availability and pricing will follow soon.
LXstudio light is another option for LXmini upgraders. Interesting for LXmini owners, that consider a flawless upgrade to LXstudio or LX521 in the future: The LX521 woofer is loaded only with the lower driver, upper drivers mounting hole temporarily closed. Ready for easy upgrade to full woofer power.
The new reclocker and HF-isolator AFI-USB did a convincing job in Corte Madera. A conventional Surface3 pro tablet PC turned into a high-end digital source, eliminating the last traces of graininess.
We were delighted by the kind of phantom stage, precision and naturalness that could be achieved with Siegfrieds LXminis , fed by a PowerBox 4180.
This AFI-USB reclocker is fed by an USB source. It combines HF elimination and a new (high precision) clocking after the optical transmission part. Not just PLL. For best signal transmission, the output is realized with EtherCon interconnects and shielded network cables. The interconnect adapt to BNC, digital coax or XLR just at the next downstream unit (=PowerBox)
If yo want to upgrade your digital USB source with an AFI-USB, just mention it with your PowerBox order. (€ 983,19 export // €1170 incl VAT). Includes 115V-230V power supply.
Will AFI-USB reclocking always improve sound notably?
1) If a digital source (€€€€-€€€€€) is extremely low in jitter an HF-noise , there isn´t much to improve.
2) If a downstream DSP / DAC introduces new jitter and artefacts, the very clean signal of AFI-USB may be messed up again.
"Open House" at Linkwitzlab.
A unique opportunity to listen to LXmini, LXstudio and LX521, presented by the designer himself.... and to experience Eike and Siegfried Linkwitz`overwhelming hospitality.
The interested audience got familiar to the design priciples of these outstanding loudspeaker system. Time for discussion and questions . And of course time to hear these unconventional loudspeakers perform, fascinating the audience with their stable, live-like illusion of musical performance, that does n o t collapse when leaving the "sweet spot".
Visitors could convince themselves by wandering around in the room: The phantom imaging remains stable , no matter where you listen from.
No Room correction at work, no fancy room treatment, no boutique cables. But intelligent engineering and a huge wealth of experience allowed the design of these transducers, that work so well with the room.
All rounded up by Eikes fantatic catering (home-made Brownies and more). Thank you!
Highly recommended , try to get a ticket for a possible future session!
The retired Chief Engineer of SCHOEPS Microphones describes his listening experiences with Linkwitz Loudspeakers in the German TONART magazine #4-2015, a supplement to the physicians "Ärzteblatt". See page 34.
TONART is also available in the www for browsing or as pdf download here
from the new batch onwards, the "Linear Audio Vol.4"-recommended Sjöström Superregulators SSR01 / SSR02 will have flexibility in output voltage and now come with cables soldered. Output voltage adjustable by 10x turn potentiometer (blue with golden turn knob, see pic below).
Input 14V to 24V --- Output 11V to 21V . Input voltage must be at least 3V higher than desired output voltage.
SSR01 Positive SuperRegulator SSR02 Negative SuperRegulator
..just to mention a statement from Daniel Weiss (Weiss DACs, Saracon conversion software etc...) on the DSD vs PCM discussion in "connect" 2013:
"Die wahren Baustellen in der Audiotechnik sind Lautsprecher und -Platzierung, Raumakustik und -korrektur, neue Paradigmen bei der Audiowiedergabe (etwa Crosstalk Cancelling) usw. Die "schneller, höher, weiter" Entwicklung, auch bei PCM, ist komplett überflüssig"
Digital jitter may reduce a digital listening experience. Today were able to hear one of these jitter-reducing-devices (latest generation), a pre-production sample of the upcoming MUTEC MC3+USB re-clocker.
HP-laptop/Win7/JRiver, FLAC files over USB > USB Cable > MC3+USB > AES/XLR cable > PowerBox 4180 > LXstudio. So, the set-up was comparable to the LXstudio set-up at Burning Amp Festival last week, except the MC3+USB re-clocker replaced the former USB-to-OPT converter.
The difference was immediate and obvious. E.g. Gene Harris´piano ("Little Darlin`" from Ray Brown:" Live at the Loa") gained substantially in clarity as well did the cymbals. Remarkable. The MC3+USB forwards the digital music data stream not only bit-perfect but also at the right pace. Once more astonished, what LXmini/LXstudio can bring to "life".
This years Burning Amp Festival took place in Redwood City/ Silicon Valley.
Thanks to all staff and volunters for making this possible!
In the "Linkwitz Lair", we were able to show Siegfrieds LXmini and LXstudio, fed by our PowerBox4180 (+2xMonoblocks for woofers)
The Linkwitz Lair was mostly taken by fascinated listeners:
"In Linkwitz´room, you don´t feel listening to loudspeakers, but to a musical performance"
LX speaker family is introduced to readers of the German Ärzteblatt via its quarterly supplement "TONART Magazin" . You´ll find news on Jazz, Classical and Pop music. See pg.32 in the online version
While writing these lines, I am enjoying LX521.4 on two PowerBoxes4400pro.
The PowerBoxes4400pro are stuffed with 400W Hypex Modules and feed every channel (even the 2-Ohms paralleled woofers ) with plenty of headroom. They operate in a MASTER/FOLLOWER tandem. Volume and Input sel are automatically synchronized between this left and the right PowerBox.
Hassle -free Loudspeaker connect is by Neutrik SpeakOn-8 pole plugs
The outstanding experience with PowerBox4180 could be enlarged to LXstudio! One 400W PowerModule400 per V-frame-woofer enhanced the lower spectrum at higher volume levels. Double basses show more low end energy, basedrums "attacks" may be felt in the chest.
LXmini with transparent tubes and PowerBox4180
Dear Dr Brenner,
.... By the way, and as Mr Linkwitz predicts, the LXmini (with PowerBox) has become the reference by which we judge other components, and recordings as well.
James S., USA
As the PowerBoxes are fully balanced designs, analogue inputs are balanced XLR plugs. If your source offers other analogue outputs than balanced XLR, checkout our new special interconnects:
RCA (cinch) to XLR. Shielded symm. quality cable, balancing R=100 Ohms in line3 (may be adapted to your source). HF blockers. 39€ (46,41€ incl VAT), 1m
3,5mm TRS (3pole) to XLR. To be used with e.g. PONO PLAYER balanced output. Shielded symm. quality cable. 29€ (34,51€ incl VAT), 0,2m.
A special high-end edition of topbaffles will be shipping soon.
See the making of the "CP-Edition" with full aluminum milled front & back,
covering a well damping Panzerholz core.
After anodizing in custom color and final assembly , the units will ship
Enjoy LX speakers with our high end PowerBox:
PowerBox listening impressions:
Samuli K with PowerBox4180 :
....Powerbox arrived, everything was professionally packaged and device in one piece. I was very happy to notice that now i can get rid of separate bulky Nad power amps, minidsp, cable jungle etc. mess. Very neat, clean and visually satisfying package. .........
When i got Powerbox the sound improvement was not marginal, it was huge! I was in fall assumption that D-class amplification is kind of thin, artificial and trebly. Sound became very balanced, just correctly warm (still not too warm or ”warm", but compared to Nad system) but very detailed and just coherent........ Sound is even detailed with correct material and Lxminis create that ”sound wall” and disappear!
Jeffrey H with PowerBox 4400Analogue pro on LX521:
Hi Frank, ....... The detail, clarity, and soundstage are all extraordinary. I don't really believe in magic, but this is the closest I've heard to real music from a recording. Thank you for all your help making this possible. Regards, Jeffrey
The PowerBox by magicLX521
High-End DSP with ultra linear Poweramplifiers
Being quite sceptical on using digital filtering for high-end listening, only a top-notch DSP solution was acceptable as "brain" of the PowerBox:
Expertly designed digital and analogue sections of the Hypex DSP platform (Netherlands) combined with only finest ingredients allows DSP design without compromise.
The PowerBox provides not only precise filtering, but also ultra linear amplification.
Enjoy the effortless musical presentation by four Hypex UcD amplifiers, well known for their neutrality and very low distortion figures. They are arranged as optimized and fully balanced internal system layout, allowing shortest signal traces and minimizing losses as well as artefacts.
The PowerBox is a preamp with volume control, a 6-ch DSP with 6ch-DAC , feeding a 4-channel power amplifier in one slim but massive powder-coated aluminum top with brushed stainless steel frontplate.
Alltogether a perfect match for Linkwitz speakers:
Sound is only "colored" by the artist, not by the amplifier! >>>>Not just sound. But music.
It's hassle free...
No error-prone "spaghetti cabling" necessary.
1) Connect your LXmini speakers to the PowerBox with professional Neutrik SpeakON® 1-click connectors.
2) Connect your source (e.g.CD-player) to the PowerBox ....and enjoy!
Transparent LXmini tubes may be varied in decoration , e.g. at the inner side of the transparent tubes with textile, foil, photos etc
Going beyond LXmini ?
Use the PowerBox as a basis for your upgrade path in the Linkwitz speaker family.
With additional woofer amplification, the 6-way DSP of the PowerBox will be able to feed your future LXstudio or LX521 speaker system.
The 8-channel system LX521.4 is run by two PowerBoxes.
Several PowerBoxes may be chained, allowing a combination of several LX521s and LXmini speakers in larger rooms or home theaters.
Interested in applying individual filters? The HYPEX FILTER DESIGN PC-software makes the PowerBox future proof and allows you to realize own projects. 15 programmable filters per each of the six channels guarantees precise XO definition and a wide spectrum of use.
PowerBox 4180, 4x180W: €1890.- (EU residents 2249€, incl 19%VAT).
PowerBox 4400 pro, 4x400W: €2190.- (EU residents 2606€, incl 19%VAT)
PowerBox 4400A pro, 4x400W; fully analogue; ASP for classic LX521: €2390.- (EU res. 2844€, incl 19%VAT).
Preloaded filters for LXmini or LXstudio owners.
A slide show illustrates the LXmini assembly (windows media player)
Building the LXmini on VIMEO https://vimeo.com/128852033
The first PowerBoxes 4180 (4x180W), containing the High-End DSP from HYPEX (Netherlands) are delivered to LXmini owners. Details will follow soon.
The HIGHEND fair in Munich started with a record number of participants.
Beeing interested in loudspeaker demonstrations, many systems showed good tonality and dynamics. But there were few of them, capable of maintaining a soundstage when sitting only one chair off the middle seat!
A believeable soundstage , comparable to the one of the LX speaker family was found on very few systems. These remarkable ones had either a dipole or omni radiation pattern.....and prices in the €€.€€€ region.
LXstudio was launched by Linkwitzlab
Welcome to the new member of the Linkwitz speaker family!
We will offer LX studio as kit and ready made units.
For proof of plan ownership, send the confirmation e-mail from linkwitzlab (required latest before shipment) to plans@magicLX521.com
For inquires concerning ready made LX Studio systems with individual finish/design options contact info@magicLX521.com
From today, all "transparent" LXminis (kits and assembled units) will have the new adapted
HDF base plate, allowing easy mounting without screws and without end caps.
From today, all LXminis with transparent tubes will have their FR driver mounted easily and without screws, without holes.
By customer request, LXmini is now available as assembled and lacquered speaker. Prices depending on choosen details.
Together with the PowerBox (4x180W, HypexDLCP, further details will be announced soon) and SpeakON cabling, this makes a turnkey solution.
Demo for local Rotary Club Members, focusing on todays possibilities of sound reproduction, with Linkwitz speakers LX521 and LXmini.
The baseplate C1/C2 comes now with a cable canal. You may use it as an alternative,
hidden cable routing. Picture taken from below (untreated HDF parts)
As the turnkey LX521 Titanium Series needs connection of loudspeaker cables at the baffle support, we used colored cables into screw clamps.
To ease the connection further, all Titanium deliveries from now on will have plug connectors.
For LX521, we widen our stock by adding assembled bridges and topbaffles in HDF. The topbaffles are available with precious wood applications (eg Paduk) for the tweeter subbaffles
HDF is an extremely robust high density, black coloured wood fibre product (>1,000 kg/m³). Its high strength across the complete board cross section facilitates three-dimensional processing without any risk of fraying. It is a natural material made of wood which defibres gently and is manufactured according to ecological principles.
Thanks to its black colouring and the compact product structure, the board can also be used as an attractive surface without additional coating
Pictures of the LXmini set containing
Baseplates and driver rings CNCed in HDF ,
4 SEAS Drivers
2 Upper Tuber predrilled white, import ,
2 Lower Tube white import
Screw Set upper tube
10 Rubber Feet
2 Speakon Holder CNCed HDF
2 Speakon Plug 4 pole
Screw Set lower tube&base
2 EndCap import
2 Rubber Coupler import
5 m cable 1,5mm²
2 Damp. Wool Monacor MDM3
€499 (within EU plus 19%VAT)
"Stereophile" visited the Linkwitz Room at the Rocky Moutain Audio Fest:
>>...The expression, "giant-killer" is, in this case, not an exaggeration <<
read more here
Your kit arrived yesterday. The accuracy, fit, and finish are simply fantastic. The cutouts for wiring connections you designed in the base plate, which I dreaded having to make myself, are already there. The shapes are perfect. The mounting blocks are ready to go, with nothing else needed. Holes have been countersunk where necessary. The dark grey HDF material is attractive, very dense and hard, and looks excellent even without any sanding or painting. Your kit makes assembly of the LXMini about as simple as playing with Lego.
Thank you very much for the obvious care you take in producing these kits. They make a fine match to SL's extraordinary designs. I cannot imagine your margins are attractive, given high production costs per piece for limited runs, so you must clearly love the Siegfried Linkwitz LX Mini and LX521, and have a desire to further their reach.
LXmini "black stylus" , side-by-side with LX521
grey upper tube , lacquered dull black
see here some parts. The full kit contains furthermore the couplers, dampening MDM3 , speakon connect etc (see list below)
Mr Linkwitz reported successful application of Monacor MDM3 Dampening Material (wool/polyester mixture) in LXmini tubes.
MDM3 is available for ordering. 2 packs needed for LXmini
LXmini SEAS drivers arrived from Norway.
Now, all LXmini kits ship in the sequence of orders arrived.
(except for parcels, that wait for white US tubes/couplers/caps)
....and new >>>>
lower tubes´transparent carbon look upper tubes´minimalistic driver mounting
connecting LX521 to your Amp or PowerBox. These pro cables are now available per meter:
Sommer Elephant 840 8x4mm²
Sommer Elepant 825 8x2,5mm²
As we are receiving requests for additional parts , the LXmini portfolio grows:
4" end caps are on the way from the US, black(*),
(sorry, not as cheap as US prices due to airfreight , inbound customs taxes etc)
Original Fernco Couplers(*):
white or blue) PVC raw cut, as received from factory
same , but cuts egalised and tube predrilled
in transparent plexiglass with polished cuts
same , but as predrilled tube
CNC-ed parts in HDF black are done and ready to ship.
We support Siegfried Linkwitz´ new creation: LXmini
The board material for the LXmini kit:
A modern high density wooden material, that avoids the downsides of MDF (soaking edges, etc).
It is HDF, in dark anthracite:
It is an extremely robust high density, black coloured wood fibreboard (>1,000 kg/m³). Its high strength across the complete board cross section facilitates three-dimensional processing without any risk of fraying. It is a natural material made of wood which defibres gently and is manufactured according to ecological principles.
It can be used as extremely compact, robust support board. Thanks to its black colouring and the compact product structure, the board can also be used as an attractive surface without additional coating
It is ideally suited for applications requiring ecologically sustainable material due to its environmentally compatible manufacturing.
Celebrating this fantastic soccer world cup in Brazil,
we are happy to announce, that the LX521 Titanium Series is now available in
Some pictures of Brazilian Cherry
The pricing is the same category as Bubinga or Paduk wood
New anthracite foam inserts
cover the cabling in the baffle support here
Electric Cars and LX521 at the CARHOTEL Stuttgart http://brc-stuttgart.de/
The CARHOTEL is a premium garage, where precious cars are taken care of. Not only during winter time. Comprehensive service package is offered for owners of (vintage) high-end cars.
Recently, selected guests had the opportunity to join the event at the CARHOTEL and go for a testride with a TESLA Model S, a BMW i3....and -of course- listen to the LX521
Even in this extremely open, reflective and asymetrical environment, the outstanding phantom imaging of LX521 could be demonstrated to an interested audience.
Two systems played alternately:
System 1 (left) fed by a LINN network player and 2 PowerBoxes
System 2 (right) fed by a SONOS connect , ASP and 8ch amplifier MarantzMM8003
Car enthousiasts were impressed by the virtual soundstage, dynamics, clarity and "reality" in the presented live recordings, as they never experienced these possibilities of stereo reproduction.
A 5.1 system owner described the LX521 soundstage as much more live-like than his system: "5.1 is rather fast-food for the ears"
Unfortunately, LX521s unique listening experience cannot be demonstrated via internet!
High End 2014 in Munich.
Meanwhile a quite big fair and an opportunity to listen to a lot of setups. Furthermore, there is room for for interesting conversations with developers and other audiophiles.
Tons of material, including amps in refrigerator size, cables as thick as forearms and speakers tall/wide like wardrobes.
Turntables, triode amps as well as the latest development in DACs and Class D amplification were shown.
Most of the setups I listened to showed very good in tonality and timbre, but only very few were able to present believeable soundstages with music "detached" from the speakers. Maybe , I´m too spoiled by LX521s performance.
The neutral sound of PowerBoxes Hypex amplification 4x400W (per side) is an excellent match for the
neutral Reference Monitor LX521. Dimensions only 44x36x5,5 cm.
Additionally to the precious veneer versions (53 wood types!) and Panzerholz,
you may also choose from these massive wood types (3-layer)
- Lightly steamed Beech
- Lightly steamed Beech Redheart
- European Oak
- Wild Oak (Rustic with knots)
- European Maple
- European Alder (not steamed)
- Ash (no brownheart)
- European Cherry
- European Walnut
- American Walnut (Black Walnut)
Three audio engineers listened to the LX521: Here is a report in German (Google Translate may help)
Long time testing of the PowerBox in 4x180W and 4x400W configurations runs sucessfully.
I like the no hassle connections
-one 8pole Speakon
First LX521 in massive oak (3 layered, line oiled)
From 2014 we ship also fully assembled systems in a 110kg airfreight container.
Rates vary with fuel surcharges
The music reproduction chain starts with the proper recording of music. You may listen to several different recording microphone arrangements:
Almost-ready-to- play LX builts are about to be finished (or are already finished). We will soon see nice pictures of LX521 in different wood types: eg. Paduk , American Walnut, Bobinga, Panzerholz, Cherrywood, Makassar, etc...
The finish ranges from oiled wood, naturmatt clear lacquer, seidenglanz clear lacquer to high-gloss finish